FEATURES

- Continuous operating reflective temperature of 1100°F, 2000°F intermittent

- Capable of reducing up to 90% of radiant heat

- Helps to prevent vapor lock, lower air intake temperatures, protects wires from melting

- Also available in a sewn seam

- Made in the USA

#274012 1/2 id x 3 ft Velcro seam

#274013 1/2 id x 10 ft Velcro seam

#274034 3/4 id x 3 ft Velcro seam

#274035 3/4 id x 10 ft Velcro seam

#274100 1-in id x 3 ft Velcro seam

#274101 1-in id x 10 ft Velcro seam

#274112 1-1/2 id x 3 ft Velcro seam

#274113 1-1/2 id x 10 ft Velcro seam

#274114 1-1/4 id x 3 ft Velcro seam

#274115 1-1/4 id x 10 ft Velcro seam

#274134 1-3/4 id x 3 ft Velcro seam

#274135 1-3/4 id x 10 ft Velcro seam

#274200 2-in id x 3 ft Velcro seam

#274201 2-in id x 10 ft Velcro seam

#274212 2-1/2 id x 3 ft Velcro seam

#274213 2-1/2 id x 10 ft Velcro seam

#274214 2-1/4 id x 3 ft Velcro seam

#274215 2-1/4 id x 10 ft Velcro seam

#274234 2-3/4 id x 3 ft Velcro seam

#274235 2-3/4 id x 10 ft Velcro seam

#274300 3-in id x 3 ft Velcro seam

#274301 3-in id x 10 ft Velcro seam

#274304 3-1/2 id x 3 ft Velcro seam

#274305 3-1/2 id x 10 ft Velcro seam

#274308 4-in id x 3 ft Velcro seam

#274309 4-in id x 10 ft Velcro seam

#274310 4-1/2 id x 3 ft Velcro seam

#274311 4-1/2 id x 10 ft Velcro seam

#274312 5-in id x 3 ft Velcro seam

#274313 5-in id x 10 ft Velcro seam

#274314 5-1/4 id x 3 ft Velcro seam

#274315 5-1/4 id x 10 ft Velcro seam

Installation Tips

Face velcro seam in opposite direction of heat source. Be sure ends of sleeve are sealed or secured to component you are trying to protect. You can seal the ends using our Thermaflect Tape, Cool Foil Tape, Thermal-Tie, shrink tube, or any mechanical fastener. Securing the ends will ensure no hot air sneaks in behind the sleeve, thus allowing it to work more efficiently. It also functions better if the heat shield sleeve is tight on the component

Brochure