FEATURES
- Continuous operating temperature of 1200°F, 2000°F intermittent
- Capable of reducing up to 60% of radiant heat
- Helps to prevent vapor lock, protects wires from melting
- Sleeving wall thickness is 1/16” thick
- Bulk rolls and larger diameters available
- Made in the USA
#240003 1-3/4 to 2-1/2id x 3 ft
#240004 1-3/4 in id x 100 ft Roll
Installation Tips
Always wear safety glasses, dust mask, and gloves when handling this product. Fiberglass may cause temporary skin and eye irritation
To expand ID of sleeve, compress the over all length of sleeve, or "bunch" up
Once sleeve is over fitting, terminals, etc, stretch the length of the sleeve to shrink down the OD
Tighten or secure ends of sleeve with heat shield tape or stainless steel locking ties
PRO TIP: Grab a can of clear high temp engine or exhaust paint, spray end of hose sleeve, let dry before cutting to prevent fraying
MSDS
Brochure
Shield radiator hoses, hydraulic hoses, hoses from heat damage, increasing their life and preventing maintenance breakdowns. Use HP Hose Sleeving to insulate air intake tubes from radiant heat lowering your intake temperatures and increasing horsepower. Special coating allows this sleeving to reflect and dissipate heat. The special braid of sleeving allows it to have an expandable inside diameter from 1 3/4" to 2 3/8". Thermal Hose Sleeving is capable of withstanding 1200°F continuous. It may be fastened using Thermal-Tie™ or hose clamp.
